Can DHMSCare monitor agitators, centrifuges, pumps and compressors in a chemical plant?
Yes. DHMSCare monitors centrifuges, pumps, including canned pumps, and compressors in chemical plants, and the motors and gearboxes that drive agitators; for hazardous areas it offers IECEx-certified hardware. A canned pump is a sealed pump with the motor inside the casing.
Why rotating equipment comes first
In a chemical plant, a failed centrifuge, compressor or pump stops production. Some of these machines move hazardous media, so a failure can also become a safety incident.
Start with the machines that run continuously and have no spare. Their bearings, rotors and gears give the earliest signs of trouble.
How DHMSCare watches each machine
Wireless sensors on the motor, pump and gearbox bearings measure vibration and temperature. Each point is compared with its own learned normal pattern, so a slow change shows before it becomes a stop.
When the load or solids inside a centrifuge build up unevenly, or its parts wear unevenly, the rotor goes out of balance and vibration at running speed rises. Agitator gearboxes are tracked for gear wear once their tooth counts are entered.
What to expect on site
Sensors mount near the bearing seats without stopping the machine. The DHMSCare DT310 sensor is IP69-rated against dust and high-pressure water, but IP69 is not a corrosion rating, so confirm the mounting plan with us for strongly corrosive areas.
Because 90%+ of DHMSCare alerts in real plants are accurate, the maintenance team can plan a repair rather than react to a stop.
Next step
In a chemical plant with many machine types, DHMSCare gives every machine its own baseline and Mina states the diagnosis, so even equipment in hazardous areas stays watched around the clock.
See the measuring points for a chemical plant on our chemicals industry page, compare sensor models on the products page, or read a polysilicon plant case.
Questions buyers also ask
Do you have certified hardware for hazardous areas?
Yes. DHMSCare offers hardware certified under IECEx, the international scheme for equipment used in explosive atmospheres; the certificate states which models and zones it covers.
Will a corrosive atmosphere damage the sensors?
IP69 protects against dust and high-pressure water, not against corrosion. For strongly corrosive areas, confirm the mounting plan with us before you install.
Which machines should we monitor first?
Monitor the critical rotating machines that run continuously: agitator drives, pumps, fans and compressors. Add centrifuges and other units as you extend the system line by line.