DHMSCare Platform · Machine health, in one view
Your whole plant, in view.
Alarms, trends, spectra and reports, all in one place, on web and mobile.
From install to decision
Five steps from machine data to a maintenance decision you can act on.
SensorsDHMSCare sensors bond to your machines and stream vibration, temperature and speed.
- Ready to use once mounted
- Vibration and temperature; speed on some models
- Up to 5 years of battery life
GatewayA gateway collects every sensor nearby and uploads the data to the cloud.
- Up to 60 sensors per gateway
- 60–80 m in a typical plant, about 300 m in open line of sight
The cloud platform stores and organises the data, machine by machine.
The platform analyses each machine automatically and turns the data into alarms and reports.
You read the alarms, trends and reports on your computer and your phone, and decide with your team.
What you see on the platform
Overview & health scores
Your whole fleet in one view, ranked by health score.
- The platform analyses each machine automatically and turns the data into alarms and reports.
- Each machine is judged against its own learned normal pattern, its baseline.
- Read it on your computer and your phone, and decide with your team.
Trends & multi-dimensional compare
History and cross-machine comparison make early signs visible.
- Sensors stream vibration, temperature and speed continuously.
- Raw waveforms and spectra are kept, so your engineer can check them against the AI's conclusions.
- Readings taken while a machine is stopped are set aside, not treated as faults.
Alarms & push
Tiered alarms pushed to the app and by email, and by text message where local rules allow.
- Alerts come in three levels: critical, warning and notice.
- Rules set, for each level, how an alert is sent and who receives it.
- App notifications come with every plan.
Inspection & reports
Inspection reports generated automatically, with every finding documented.
- Daily condition-monitoring reports, weekly and monthly care reports, and AI diagnostic reports.
- Each fault is explained in plain language, with the evidence behind it.
- The AI diagnostic report is one structured document you can share with management.
The three things customers talk about most.
AI placement, alarms you trust, two-minute diagnosis: the three things customers use every day.
Digital-Twin Modeling with AI Sensor Placement
- Build a digital model of motors–couplings–gearboxes–pumps in minutes, cross-brand.
- AI recommends optimal sensor locations from mechanical principles + prior data — less expert dependency, more consistent installs.
- Cut deployment from weeks/months to days. Scale across lines and plants on the same template.
Fewer false alarms. Alerts you can trust.
- It learns how your machines really run — load, recipe, season — so the only alarms you get are the ones worth acting on.
- Live vibration and temperature, with trends, a health score, alert levels, and root-cause hints — all updated as it happens.
- Early-anomaly detection accuracy 90%+.
End-to-End AI Diagnosis in Two Minutes
- Ask what is wrong. The DHMSCare physics + AI engine knows 60+ rotating-equipment faults across shafts, bearings and gears — plus models built for motors, screens, compressors and more.
- You get the root cause, how serious it is, and what to do — written for the operator on shift, not the analyst.
- An answer in two minutes, no expert needed, 85%+ accurate.
How it gets there
Multi-parameter sensors with edge computing keep the raw data clean.
The baseline is learned from each machine's own operating data on install day.
Alerts escalate by severity and every one is reviewed by your maintenance team.
Each machine is compared with its own normal pattern; an alert goes critical only when the change keeps growing or a second sign confirms it. 90%+ of alerts are accurate.
Read the full answer →Alert levels come from each machine's own learned baseline; ISO standards are only the starting reference.
Read the full answer →First diagnostic verdicts on the day the sensors are installed, no months-long learning period.
Read the full answer →DHMSCare checks whether the machine is running, sets stopped readings aside, compares each speed against its own level, and confirms operating states after load changes.
Read the full answer →Equipment it monitors
For rotating and reciprocating equipment.
Motors
Reducers
Gearboxes
Air compressors
Centrifugal blowers
Cooling fans
Pumps
Pump unitsDeployment & your data
Data stays on nodes inside the Chinese mainland and does not leave the country; central and state-owned enterprise projects can run on-premises in the customer’s own server room.
Why DHMSCare
- DHMSCare keeps the total cost in check with its own smart hardware and a standardized system: priced by equipment and installation-point count, deployed in the cloud, no local server needed.
- DHMSCare is priced per plant by equipment and installation-point count, and installation is carried out by DHMSCare’s own 20+ person on-site implementation team.
- DHMSCare's multi-dimensional alarm strategy delivers 90%+ alarm accuracy.
- DHMSCare's physics + AI + expert diagnosis delivers 85%+ diagnostic accuracy.
- DHMSCare closes the loop across issue tracking, root cause and next actions.
- DHMSCare feels like a consumer app, with zero learning curve.
- DHMSCare's on-site AI assistant Mina makes you an expert too.
- DHMSCare lets you inspect any machine, any time.
- DHMSCare openly ingests third-party sensor data.
- DHMSCare plugs in southbound standard protocols out of the box.
- DHMSCare's northbound APIs get your data into your business systems.
Frequently asked questions
Can I see the raw waveforms and spectra?
Yes. DHMSCare keeps the raw vibration waveforms and spectra, the frequency breakdown of a vibration signal, so your reliability engineer can examine them alongside the AI's conclusions. Waveform analysis tools come with the Care, AI Care and AI Care Plus plans, with an advanced toolkit on AI Care and AI Care Plus.
Do I need to read spectra myself?
No. DHMSCare reads the spectra for you and explains each fault in plain language, so no in-house vibration engineer is required. Each conclusion comes with its evidence and a recommended maintenance action, and AI fault diagnosis is included in the AI Care and AI Care Plus plans.
What reports does DHMSCare provide?
DHMSCare produces daily condition-monitoring reports, weekly and monthly care reports, and AI diagnostic reports. Inspection reports are generated automatically, with every finding documented.
Do you support third-party sensors?
Yes. DHMSCare openly ingests third-party sensor data and plugs in southbound standard protocols out of the box.
Can the data reach our own business systems?
Yes. DHMSCare's northbound APIs get monitoring data out of the platform and into your business systems.
Explore plans and packages, or start with a trial.