Which equipment on a pig or poultry farm is worth monitoring, such as ventilation fans and feed lines?
DHMSCare can monitor ventilation fans and feed machines: at a leading pig producer's feed mills it watches grinders, pellet mills, mixers and scraper conveyors. A feed mill is the plant that grinds, mixes and presses feed for the farms.
A pellet mill presses ground feed into small pellets.
Why fans and feed machines come first
Ventilation fans and feed machines run every day, and the animals depend on both. A stopped fan affects the air in the house, and a stopped feed machine holds up the feed supply.
A worn bearing, belt, motor or gearbox can stop a fan or a feed machine. Bearing wear, imbalance and misalignment change the vibration before the machine fails.
How DHMSCare covers a farm
Wireless sensors go on the bearing housings of fans, grinders, pellet mills, mixers and conveyor drives. DHMSCare compares each machine with its own learned baseline and warns when a change keeps growing.
Mina, the industrial AI agent, then explains the likely fault and the steps to inspect and fix it. A farm team does not need a vibration engineer to act on it.
What to expect on a remote site
A remote farm may have no plant network at all. The DMG311 gateway connects through 4G or Ethernet, so the sensor data still gets to the platform.
Fitting the sensors needs no shutdown, and pairing takes one phone tap per sensor. In real deployments, 85%+ of AI fault diagnoses are correct, and multi-expert review brings that from the 85%+ base to 90%+.
Next step
See the livestock farming page, check the DMG311 gateway for remote sites, and read the feed-mill case.
Questions buyers also ask
Do you have a poultry farm case?
Not yet. The case on our site comes from pig production feed mills. Fans and feed machines on a poultry farm are rotating machines, so DHMSCare can monitor them in the same way.
How do alerts reach a farm manager?
By app push and email. Where local telecom rules permit, text messages work too.
Can we start with one barn or one feed line?
Yes. You can begin with 10 sensors and one gateway on the machines that matter most, then add more line by line.